Is the roof panel on your C4 Corvette showing age? Exact reproduction Polycarbonate Removable Roof Panels for 1984-1996 C4′s are available at Zip Corvette. These roof panels include the correct polycarbonate lens with an improved coating, making them almost indestructible. Featuring Factory Blue Tint (privacy glass), a Super Abrasion Resistant (SAR) hard coated lens, correct DOT (Department of Transportation) markings and reproduction latex weatherstrips, these tops will pass NCRS guidelines. GM Licensed with the correct GM part # 12370123.
Early 1986 design measures 28 1/2″ between the mounting bolts on the front windshield; late 1986 measures 31 1/2″. Confirm measurements on 1986 Corvette prior to ordering.
Note: All factory roof panels require fitment to your Corvette prior to installation. Fitments can be handled by simply loosening all mounting points and then installing the roof panel. Once roof panel is aligned and installed – mounting brackets can be secured on the panel from the inside of the Corvette.
You work hard to keep your Corvette looking it’s best – on the inside and out. Imagine the heartbreak if the next (or first) chip or scratch comes from you – in your own garage.
Leaving your fenders unprotected while working under the hood is just asking for trouble. Tools slip out of hands, loose parts fall to the cement floor and paint jobs are ruined. But an ounce of prevention goes a long way. Before you pop the hood to get your hands dirty, protect your paint job with a Corvette Fender Mat or Cover. Quality “no-slip” backing ensures the mat stays in place while you work and when the job is done, the mat easily wipes clean. Available in a variety of styles for all generations, you can’t afford to be without these mats!
Get the valuable judging points you are chasing with a pair of correctly reproduced C2 Corvette Sill Plates. A seasoned Corvette restorer will tell you that sometimes, the most obscure Corvette Parts are what really complete the car.
Zip has new reproduction front trim moldings for 1979-1982 Corvettes equipped with fiberglass painted t-tops. These t-top trim moldings include rubber sealing strips and install just as the original 1979-1982 t-top moldings attached.
Increase the safety of your C5 or C6 Corvette in a stylish manner with a new LED turn signal mirror kit from Zip Corvette. By adding this LED mirror kit to your Corvette’s side mirrors your Corvette will display a flashing chevron in the corresponding side mirror once the turn signal is activated, alerting drivers in your blind spot of your intentions. In addition to being used as an alert when making a lane change or turning; the LED mirror kit also functions when the vehicles emergency flashers are turned on. Whether driving on the interstate or using your flashers to parallel park in the city, all surrounding drivers will be fully aware of the bright LED mirror displays while you as the driver will only see a subtle display reminding you that the mirror is activated.
Each LED mirror kit includes all Corvette Parts required to remove the existing mirrors internal parts and replace them with the LED mirrors. Every mirror kit is fully tested before shipment and includes a one year warranty.