Zip Corvette now has the ZR1 Corvette Front Splitter available for all C6 Corvettes. The front splitter, which comes stock in carbon fiber on the new ZR1 Corvette is an identical fiberglass reproduction of GM’s original design. There are two different molds of the new front splitter; one for all C6 non Z06 or ZR1 Corvettes, and another for both the Z06 and ZR1.

The ZR1 front splitter comes ready to paint, includes all hardware for installation, and can be installed fairly easily in about one hour. Be aware however that the provided hardware is not enough to securely fasten the front splitter. Due to the added downforce, a factory ZR1 Front Bumper Reinforcement is recommended when installing. Without this reinforcement the front splitter could be separated from your Corvette while driving. This front reinforcement is only available for Z06 & ZR1 Corvettes; it will not fit a non Z06 or ZR1 unless the car has a Z06 body update kit installed. Also know that these fiberglass front splitters are not meant for competition use but strictly for visual enhancements.

If you think the ZR1 Front Splitter is without a doubt your next Corvette’s upgrade but you would like to go with the original carbon fiber front splitter, you can. The Carbon Fiber ZR1 Corvette Front Splitter will fit all C6 Z06 and ZR1 Corvettes. If your C6 Corvette has our famous Z06 Body Update Kit the new carbon fiber front splitter will fit your Corvette as well. The bumper reinforcement is recommended for this front splitter also.